PMI Model No. PSD-2G6G-CD-1 is High Power, Switch Box Assembly that provides protection to front-end receivers when in the presence of high power signals. This is accomplished by sensing the input signal level and then switching the input signal into 50 ohms terminations when a set threshold level is exceeded. This assembly operates from 2.0 to 6.0GHz and can handle input power levels up to 10 Watts CW. The unit is supplied with an external 0 to 69dB step attenuator that can be used to adjust the signal levels feeding the internal threshold detector and thereby setting the trigger level of when the unit passes the input RF signal to the output of the switch assembly or when the signal is switched into the internal 50 ohms terminations. The switching speed is 50ns maximum. This unit operates on 110VDC, 50/60Hz and is supplied in a housing that measures 15.0” x 10.0” x 4.0”. This unit is ruggedized and designed for harsh environments and is EMI shielded.
Quick Links: (click the links below for additional information)
Product Feature
Test Report
Specifications:
| Final Assembly: |
|
| Frequency Response | 2.0 to 6.0GHz |
| Power | 110VAC Only, 50.60GHz |
| Size | 15.0" x 10.0" x 4.0" |
| Finish | Painted Gray |
| Weight | 20 lbs typ. |
| Pin Diode Switch: | |
| Power Handling | >= 10W |
| Frequency Response | 2.0 to 6.0GHz |
| Switching Speed | < 50ns |
| Threshold Detector: | |
| Frequency Repsonse | 2.0 to 6.0GHz |
| Switching Speed | < 50ns |
| Output Type | TTL (Compatible with Pin Switch) |
| Sensitivity | < -40dBm |
| Max Power (No Damage) | 10 dBm |
| Coupler: | |
| Power Handling | >= 10W |
| Frequency Response | 2.0 to 6.0GHz |
| Coupling Factor | 20 db |
| 50 Ohm LOAD: | |
| Power Handling | >= 10W |
| Frequency Response | 2.0 to 6.0GHz |
| Attenuator: | |
| Power Handling | > 2W |
| Frequency Response | 2.0 to 6.0GHz |
| Attenuation | 0 - 69 By (1) Front Panel Knob or Thumb Wheel |
Environmental Ratings:
| Temperature: | -35ºC to +85 ºC Operating |
| -40 ºC to +85 ºC Non-Operating |
| Humidity: | MIL-STD-202F, Method 103B Cond. B |
| Shock: | MIL-STD-202F, Method 213B Cond. B |
| Vibration: | MIL-STD-202F, Method 204D Cond. B |
| Altitude: | MIL-STD-202F, Method 105C Cond. B |
| Temperature Cycle: | MIL-STD-202F, Method 107D Cond. A |