| General Parameters: |
|---|
| Status: | Active |
|---|
| Frequency: | 6.0 to 18.0 GHz |
|---|
| Frequency Min: | 6.0 GHz |
|---|
| Frequency Max: | 18.0 GHz |
|---|
| Insertion Loss: | 3.5 dB max. |
|---|
| Isolation: | 60 dB min. |
|---|
| Reflective / Absorptive: | Absorptive |
|---|
| Input Power: | +27 dBm (0.5 W) max. |
|---|
| VSWR In/Out: | 2.0:1 max. |
|---|
| Switching Speed: | 70 ns max. (50% TTL to 10%/90% RF) |
|---|
| Impedance: | 50 Ohms |
|---|
| Control Signal: | Solder Pin (TTL Logic) |
|---|
| Connectors: | SMA (F) |
|---|
| Size: | 1.2" x 1.2" x 0.5" |
|---|
| Finish: | Painted Blue |
|---|
| Sealing: | Conductive Hard Epoxy Seal, Unless Otherwise Specified |
|---|
| Insertion Loss Ripple: | ±0.75 dB max. |
|---|
| Rise/Fall Time: | 70 ns (10%/90% RF) |
|---|
| Switching Rate PRF: | 1 MHz |
|---|
| Video Transients: | 50mV P-P at 350 MHz BW |
|---|
| OP1dB Compression: | +5 VDC (±5%)/120 mA max. (VDC + CTL Lines)
-12 VDC (±5%)/120 mA max. |
|---|
| Environmental Ratings: |
|---|
| Operating Temperature: | -45°C to +85°C |
|---|
| Non-Operating Temperature: | -54°C to +125°C |
|---|
| Humidity: | MIL-STD-202F, Method 103B Cond. B |
|---|
| Shock: | MIL-STD-202F, Method 213B Cond. B |
|---|
| Vibration: | MIL-STD-202F, Method 204D Cond. B |
|---|
| Salt Fog: | MIL-STD-202F, Method 101D-EST Cond. B |
|---|
| Fungus: | MIL-STD-810F, Method 508.5 |
|---|
| Thermal Shock: | MIL-STD-202F, Method 101D Cond. A |
|---|
| EMI/EMC: | MIL-STD-461E |
|---|