PEC-40-25-218-20-12-SFF-CMOSVG Active

PMI Model No. PEC-40-25-218-20-12-SFF-CMOSVG is a dual gain amplifier that operates between the frequency range 2.0 to 18.0 GHz.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 2.0 GHz
Frequency Max: 18.0 GHz
VSWR In/Out: 2.0:1 max.
OP1dB: +20 dB typ.
Noise Figure: +3.8 dB typ.
DC Voltage Supply: ±15 VDC
DC Supply: 780 mA max. @ +15 V ± 5% Max Gain Position
610 mA max. @ +15 V ± 5% Min Gain Position
Saturated Output Power Over Operating Temp Range: +26 dBm typ. (Both Gains)
Input/Output Impedance: 50 Ohms nominal
Input Power (Without Damage): +20 dBm CW max.
In-Band Harmonics @ or Below the 1 dB Compression Point: -10 dBc min.
Pulse Rise Time with input signals up to 20 dBm: <5 ns
Pulse Overshoot with input signals up to 20 dBm: <0.5 dB
Gain Switching Time: <500 ns
Gain Switch Control: CMOS High "1" - Max Gain
CMOS Low "0" - Min Gain
Finish: Painted Blue
Pout @ 1 dB Compression @ +25ºC: Max Gain Position: +21 dB min.
Min Gain Position: +20 dB typ.
Gain @ +25ºC: Max Gain Position: +40 dB ± 2 dB max.
Min Gain Position: +25 dB ± 2 dB max.
Noise @ +25ºC: Max Gain Position: +4.5 dB typ.
Min Gain Position: +7.0 dB typ.
Pulse Droop (250 us pulse width): <2.0 dB (Input Signal up to -20 dBm)
Pulse Recovery (250 us pulse width): 15 ns (Input Signal up to -20 dBm)
Gain @ -25°C: Max Gain Position: +42 dB ± 2 dB max.
Min Gain Position: +27 dB ± 2 dB max.
Gain @ +75°C: Max Gain Position: +37 dB ± 2 dB max.
Min Gain Position: +22 dB ± 2 dB max.
Pout @ 1 dB Compression @ -25°C: Max Gain Position: +21 dB min.
Min Gain Position: +20 dB typ.
Pout @ 1 dB Compression @ +75°C: Max Gain Position: +20 dB min.
Min Gain Position: +20 dB typ.
Noise @ -25°C: Max Gain Position: +3.8 dB typ.
Min Gain Position: +6.0 dB typ.
Noise @ +75°C: Max Gain Position: +5.0 dB typ.
Min Gain Position: +8.0 dB typ.
Spurious Output Signal @ Any Signal Level up to the Max Input Level: -80 dBc max.
Environmental Ratings:
Temperature: -55°C to +85° (Operating)
-65°C to +125°C (Non-Operating)
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A