General Parameters: |
Status: | Active |
Frequency Min: | 0.5 GHz |
Frequency Max: | 18.0 GHz |
VSWR In/Out: | 2.0:1 Max |
OP1dB: | Max Gain Position: +19 dB Min Min Gain Position: +17 dB Min |
Noise Figure: | Max Gain Position: +5.0 dB Max* Min Gain Position: +7.5 dB Max* * = Above 1.0 GHz |
Frequency Range: | 0.5 to 18.0 GHz |
DC Voltage Supply: | 780 mA Max @ +12 V ± 5% Max Gain Position 610 mA Max @ +12 V ± 5% Min Gain Position |
Input/Output Impedance: | 50 Ohms nominal |
Input Power (Without Damage): | +20 dBm CW Max |
In-Band Harmonics @ or Below the 1 dB Compression Point: | -10 dBc Typ |
Pulse Rise Time with input signals up to 20 dBm: | <5 ns |
Pulse Overshoot with input signals up to 20 dBm: | <0.5 dB |
Gain Switching Time: | <500 ns |
Gain Switch Control: | TTL High "1" - Max Gain TTL Low "0" - Min Gain |
Finish: | Painted Blue |
Size: | 2.54" X 1.0" X 0.353" |
Connectors In/Out: | SMA (F) Removalable |
Pout @ 1 dB Compression @ +25ºC: | Max Gain Position: +19 dB Min Min Gain Position: +17 dB Min |
Sealing: | Epoxy Sealed |
Gain @ +25ºC: | Max Gain Position: +38 dB ±4 dB Max Min Gain Position: +23 dB ±4 dB Max |
Noise @ +25ºC: | Max Gain Position: +5.0 dB Max* Min Gain Position: +7.5 dB Max* * = Above 1.0 GHz |
Pulse Droop (250 us pulse width): | <2.0 dB |
Spurious Output Signal (upto max): | -80 dBc Max |
Saturated Output Power (Both Gains): | +25 dBm Typ |
Pulse Recovery (250 us pulse width): | 15 ns |
Environmental Ratings: |
Temperature: | -55 ºC to +85 ºC Operating -55 ºC to +125 ºC Non-Operating |
Humidity: | MIL-STD-202F, Method 103B Cond. B |
Shock: | MIL-STD-202F, Method 213B Cond. B |
Vibration: | MIL-STD-202F, Method 204D Cond. B |
Altitude: | MIL-STD-202F, Method 105C Cond. B |
Temperature Cycle: | MIL-STD-202F, Method 107D Cond. A |