Request Quote

P6T-2G18G-60-T-512-SFF-LV-SP Active

SP8T Absorptive, Low Video Transient, Solid-state Switch

Product Feature

Quantic PMI Model P6T-2G18G-60-T-512-SFF-LV-SP is a single pole, six throw, absorptive, low video transient, solid state switch operating over the frequency range of 2.0 to 18.0 GHz. This model has a maximum insertion loss of 4.0 dB and a minimum isolation specification of 60 dB with video transients of 2 mV typically. It operates at 23 dBm CW maximum and has a survival specification of 27 dBm CW maximum and offers a typical switching speed of 30 ns. The unit is supplied with removable SMA (F) connectors in a hermetically sealed housing that measures 1.5" x 2.0" x 0.4".

Product Specifications

General Parameters:
Status: Active
Frequency: 2.0 to 18.0 GHz
Frequency Min: 2 GHz
Frequency Max: 18 GHz
Insertion Loss (Typ): 4 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 50 ns
Configuration: SP6T
Isolation: 60 dB Max
Insertion Loss: 4 dB Max
VSWR In/Out: 2.0:1 Max
Input Power: 23 dBm CW Max (Operating),
27 dBm CW Max (Survival)
Video leakage: 50 mV Peak-Peak Max
Switching Speed: 50 ns Max (On - 50% TTL to 90% RF), (Off - 50% TTL to 10% RF)
Impedance: 50 OHMS
Control Logic 0: 1.6 mA Max SINK @ 0.4 V (Insertion Loss)
Control Logic 1: 40 µA Max SOURCE @ 2.4 V (Isolation)
Control Signal: 6 Line TTL Logic
*Surge Protection Included on TTL Lines
Power Supply: +5 VDC @ 300 mA Typ,
-12 VDC @ 100 mA Typ
Connectors: SMA (F) Removable
Size: 1.5" x 2.0: x 0.4"
Finish: Hermetic
Environmental Ratings:
Operating Temperature: -55 ºC to +85 ºC
Non-Operating Temperature: -60 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A