P4T-6G18G-27-T-SFF Active

SP4T Absorptive Switch

Quantic PMI Model P4T-6G18G-27-T-SFF is a single pole, four throw, absorptive switch operating over the 6.0 to 18.0 GHz frequency range. This model offers a minimum of 27 dB isolation, while maintaining a maximum insertion loss of 4.5 dB and a maximum VSWR of 2.3:1. This compact housing is outfitted with SMA female connectors.

Product Specifications

General Parameters:
Status: Active
Frequency: 6.0 to 18.0 GHz
Frequency Min: 6 GHz
Frequency Max: 18 GHz
Insertion Loss (Typ): 4.28 dB
Isolation (Typ): 66 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): 500 ns
Configuration: SP4T
Isolation: 45 dB Min @ 6.0 to 8.0 GHz - Measured 66 dB Min,
27 dB min. @ 8.0 to 18.0 GHz - Measured 52 dB Min
Insertion Loss: 2.5 dB Max @ 6.0 to 8.0 GHz - Measured 2.20 dB Max,
4.8 dB Max @ 12.4 to 18.0 GHz - Measured 4.28 dB Max
VSWR In/Out: 2.3:1 Max @ 6.0 to 12.4 GHz - Measured 1.88:1,
2.0:1 Max @ 12.4 to 18.0 GHz - Measured 1.88:1
Operating Peak Input Power: 10 W Peak, 75 W Peak
Survival Power: Off Port: 1 W Average,
On Port: 1 W Average
Switching Speed: 500 ns Max (From 50% TTL to 90%/10% RF Voltage) - Measured 50 ns/25 ns
Impedance: 50 Ohms
Control Signal: Schottky TTL, One Unit Load
Power Supply: +5.0 VDC ± 5% @ 100 mA Max - Measured 97 mA, -15.0 VDC ± 5% @ 60 mA max. - Measured 30 mA
Connectors: RF: SMA Female
Power & Control Connector: Solder Terminals
Size: 0.996" x 0.996" x 0.366"
Weight: 45 g (1.59 oz) Max
Environmental Ratings:
Operating Temperature: -25 ºC to +85 ºC
Non-Operating Temperature: -30 ºC to +125 ºC
Humidity: 0-100% Relative Humidity
Shock: 15G, 11 ms
Vibration: Double Amplitude: 10 mm @ 2 to 5 Hz, Double Amplitude: 5 mm @ 5 to 10 Hz
Altitude: 50,000 Feet