Request Quote

P4T-10G40G-60-T-292FF Active

SP4T Solid-State, Absorptive Switch

Product Feature

Quantic PMI Model P4T-10G40G-60-T-292FF is a SP4T Solid-State, Absorptive Switch that operates from 10 to 40 GHz. This model offers over 60dB of isolation and less than 6dB insertion loss. The rise time is less than 15 ns and the fall time is less than 5nsec typically. This model is designed to operate with input power levels up to +23 dBm CW. The DC Supply is +5 V, 75 mA and -5 V, 45 mA typically. The housing measures 1.25” x 1.25” x 0.50” and is supplied with 2.92mm Female connectors.

Product Specifications

General Parameters:
Status: Active
Frequency: 10.0 to 40.0 GHz
Frequency Min: 10 GHz
Frequency Max: 40 GHz
Insertion Loss (Typ): 6 dB
Isolation (Typ): 60 dB
Reflective / Absorptive: Absorptive
Switching Speed (Typ): <100 ns
Configuration: SP4T
Isolation: 60 dB Min - Measured 69.58 dB
Insertion Loss: 6 dB Max - Measured 5.62 dB
Insertion Loss Flatness: ±1.5 dB Typ over full band - Measured 1.47 dB
VSWR In/Out: 2.0:1 Max - Measured 1.98:1 IN, 1.96:1 OUT
Input Power: >200 mW CW Max (+23 dBm CW)
Switching Speed: 10% to 90% <100 ns - Measured 30 ns
Control Signal: 2-BIt Decoded TTL Logic
Power Supply: +5 VDC @ 100 mA Typ - Measured 75 mA
-5 VDC @ 100 mA Typ - Measured 43 mA
Connectors: 2.92mm (F)
Power & Control Connector: Solder Pins
Size: 1.25" x 1.25" x 0.5"
Finish: Gold Plated
Environmental Ratings:
Operating Temperature: -55 ºC to +85 ºC
Non-Operating Temperature: -65 ºC to +125 ºC
Humidity: MIL-STD-202G, Method 103B Cond. B
Shock: MIL-STD-202G, Method 213B Cond. B
Vibration: MIL-STD-202G, Method 204D Cond. B
Altitude: MIL-STD-202G, Method 105C Cond. B
Temperature Cycle: MIL-STD-202G, Method 107D Cond. A