Request Quote

P2T-1G18G-10-R-5V-SFF-HIP10W-HERM Active

Product Feature
Additional Documents

PMI Model No. P2T-1G18G-10-R-5V-SFF-HIP10W-HERM is a hermetically sealed, reflective, single pole, two throw pin diode switch that operates over the 1.0 to 18.0GHz frequency range. This model is capable of handling an input power level of 5 W CW while providing switching speeds of less than 40 ns typically. Port to Port isolation is 25 dB typically while providing low insertion loss of 2.5 dB typical. The DC power required is a single +5 VDC voltage with low current consumption of 35 mA. This model incorporates a TTL compatible driver for easy system integration

Product Specifications

General Parameters:
Status: Active
Frequency Min: 1 GHz
Frequency Max: 18 GHz
Insertion Loss (Typ): 4 dB
Isolation (Typ): 10 dB
Reflective / Absorptive: Reflective
Switching Speed (Typ): 40 nsec
Frequency: 1.0 to 18.0 GHz
Configuration: SP2T
Isolation: 10 dB Min. - Measured 25.1 dB
Insertion Loss: 4.0 dB Max., 3.0 dBm goal - Measured 2.53 dB
VSWR In/Out: 2.0:1 - Measured 1.64:1
P1dB: +40 dBm Goal
Input Power: 5 W CW Max., (Not to be switched any higher than 50 kHz [PRI])
Switching Speed: <40 ns Typ, 100ns Max. - Measured <40 ns
Impedance: 50 ohms
Control Signal: TTL Logic
Power Supply: +5 to +12 VDC @ 50 mA Max. - Measured 35 mA
Connectors: SMA(F) - Removable
Size: 1.2" x 1.0" x 0.5"
Finish: Painted Gray, Bottom side - Unpainted
Environmental Ratings:
Temperature (Operating): -54 to +100 ºC
Temperature (Storage): -55ºC to +125 ºC
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107