General Parameters: |
Status: | Active |
Frequency Min: | 12 GHz |
Frequency Max: | 18 GHz |
Insertion Loss (Typ): | 1.5 dB Typ 2.0 dB Max |
Isolation (Typ): | 45 dB |
Reflective / Absorptive: | Reflective |
Switching Speed (Typ): | 60 ns |
Frequency: | 12.0 to 18.0 GHz |
Configuration: | SP2T |
Isolation: | 45 dB Min - Measured 45.4 dB |
Insertion Loss: | 1.5 dB Max - Measured 1.39 dB |
VSWR In/Out: | 2.0:1 - Measured 1.61:1 |
Switching Rage PRF: | 2 MHz |
Input Power: | 10 Watts Max |
Operating Peak Input Power: | 30 Watts Max |
Switching Speed: | 60 ns Max - Measured 50 ns |
Rise Time: | 20 ns Max - Measured 20 ns |
Fall Time: | 20 ns Max - Measured 20 ns |
Pulse Width: | 1 µs Max |
Delay On: | 50 ns Max - Measured 50 ns |
Delay Off: | 50 ns Max - Measured 50 ns |
Control Signal: | TTL Low (0.2 VDC Nominal) = Insertion Loss, TTL High (3.5VDC Nominal) = Isolation, Solder Pin |
Power Supply: | +15 V @ 100 mA Max - Measured +15 V @ 72 mA, -15 V @ 75 mA Max - Measured -15 V @ 3 mA |
Connectors: | SMA (F) |
Size: | 1.20" x 1.00" x 0.50" |
Finish: | Gray epoxy polimide coating IAW MIL-C-22750, Type I over epoxy polimide primer IAW MIL-2377, Type I, Class 1 or 3 |
Weight: | 1.5 oz Typ |
Environmental Ratings: |
Temperature (Operating): | -55 ºC to +85 ºC |
Temperature (Storage): | -65 ºC to +125 ºC |
Humidity: | MIL-STD-202F, Method 103B Cond. B |
Shock: | MIL-STD-202F, Method 213B Cond. B |
Vibration: | MIL-STD-202F, Method 204D Cond. B |
Altitude: | MIL-STD-202F, Method 105C Cond. B |
Temperature Cycle: | MIL-STD-202F, Method 107D Cond. A |