P2T-10M8G-45-R-50W-AL Active

SP2T Reflective Switch

Quantic PMI Model P2T-10M8G-45-R-50W-AL is a single pole, two throw reflective switch designed to operate over the 10 MHz to 8.0 GHz frequency range. This model is designed to handle 50 Watts average input power.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 0.01 GHz
Frequency Max: 8.0 GHz
Reflective / Absorptive: Reflective
Frequency: 0.01 to 8.0 GHz
Configuration: SP2T
Isolation: 50 dB Min, 51 dB Typ @ 0.01 to 1.0 GHz
40 dB Min, 41 dB Typ @ 1.0 o 4.0 GHz
37 dB Min, 38 dB Typ @ 4.0 to 6.0 GHz
36 dB Min, 37 dB Typ @ 6.0 to 8.0 GHz
Insertion Loss: 0.90 dB Max, 0.80 Typ @ 0.01 to 1.0 GHz
1.25 dB Max, 1.20 dB Typ @ 1.0 to 4.0 GHz
1.80 dB Max, 1.75 dB Typ @ 4.0 to 6.0 GHz
2.60 dB Max, 2.50 dB Typ @ 6.0 to 8.0 GHz
VSWR In/Out: 2.0:1 Max, 2.0:1 Typ @ 10 MHz to 1.0 GHz
1.50:1 Max, 1.45:1 Typ @ 1.0 to 4.0 GHz
1.70:1 Max, 1.60:1 Typ @ 4.0 to 6.0 GHz
2.00:1 Max, 1.80:1 Typ @ 6.0 to 8.0 GHz
Switching Rate: 15 kHz Max, 50% Duty Cycle
Input Power: 50 W Average
Switching Speed: 100 ns Typ
Control Signal: TTL (See Logic Table)
Power Supply: +5 V @ 100 mA Max
Connectors: SMA (F)
Size: 1.20” x1.0” x 0.5”
Finish: Painted Blue (No Paint on Mounting Surface)
Cold Switching: Yes
Environmental Ratings:
Temperature (Operating): -45 ºC to +85 ºC
Temperature (Storage): -54 ºC to +125 ºC
Environmental: MIL-STD-810E
EMI / EMC: MIL-STD-461