General Parameters: |
Status: | Preliminary |
Frequency Min: | 0.01 GHz |
Frequency Max: | 6 GHz |
Insertion Loss (Typ): | 2.5 dB |
Isolation (Typ): | 25 dB |
Reflective / Absorptive: | Reflective |
Switching Speed (Typ): | 100 nsec |
Frequency: | 0.01 to 6 GHz |
Configuration: | SP2T |
Isolation: | 25 dB typ, 20 dB min. |
Insertion Loss: | 2.5 dB typ, 2.8 dB max. |
VSWR In/Out: | 2.0:1 typ. |
Input Power: | 40 Watts CW max , (Not to be switched any higher than 50kHz [PRI] or hot switched) |
Switching Speed: | 100ns max, (50% TTL to 10%/90% RF) |
Impedance: | 50 O |
Control Signal: | TTL Logic |
Power Supply: | +5 V @ 30 mA typ, -48 V @ 30 mA typ |
Connectors: | SMA(F) - Removable |
Power & Control Connector: | Solder Pins |
Finish: | Painted Blue, (Bottom side to be unpainted - silver plated) |
Environmental Ratings: |
Temperature (Operating): | -54 to +85 ºC |
Temperature (Storage): | -55 ºC to +125 ºC |
Shock: | MIL-STD-202F, Method 213B Cond. B |
Vibration: | MIL-STD-202F, Method 204D Cond. B |
Altitude: | MIL-STD-202F, Method 105C Cond. B |
Temperature Cycle: | MIL-STD-202F, Method 107D |