Request Quote

P1T-1G18G-85-R-5V-SFF-HIP10W Active

Product Feature

PMI Model No. P1T-1G18G-85-R-5V-SFF-HIP10W is a reflective, single pole, single throw pin diode switch that operates over the 1.0 to 18.0 GHz frequency range. This model is capable of handling an input power level of 10 watts CW while providing 85 dB of isolation and a switching speed of 50 ns maximum. This model incorporates a TTL compatible driver for easy system integration.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 1.0 GHz
Frequency Max: 18.0 GHz
Reflective / Absorptive: Reflective
Isolation: 85 dB
Insertion Loss: 4.0 dB max., 3.0 dB goal
VSWR In/Out: 2.0:1
Input Power: 10 W CW max. operating (Not to be Switched Any Higher than 50 kHz (PRI))
Switching Speed: 50 ns max. (At Low Power)
Impedance: 50 Ohms
Control Signal: TTL Logic
Connectors: SMA (F) Removable
Power & Control Connector: Solder Pins
Finish: Painted Gray (Bottom Side - Unpainted)
Sealing: Hermetic
Supply Voltages: +5 V @ 30 mA typ.
1 dB Compression: +40 dBm goal
Environmental Ratings:
Temperature (Operating): -54°C to +100°C
Temperature (Storage): -55°C to +125°C
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Metod 107