| General Parameters: |
| Status: | Preliminary |
| CW Immune (Yes/No): | Yes |
| Frequency Min (GHz): | 8 |
| Frequency Max (GHz): | 18 |
| TSS (dBm): | -71 |
| Log Slope (mV/dB): | 70 ± 3 |
| Log Range (dBm): | -65 to 0 |
| Log Linearity: | ±1.0 dB Max |
| Rise Time: | 28 ns Max (10 to 90% @ -40 & -10 dBm) |
| Fall Time: | 300 ns Max (@ -40 & -10 dBm) |
| Recovery Time: | 500 ns Max (From 90% of a -5 dBm, 100 us Pulse to Within ±1 dB of Baseline) without Amplitude Loss of a Following -65 dBm, 100 ns Pulse |
| Settling Time: | 50 ns Max (From 10% to within 35 mV of Final Value @ -40 & -10 dBm) |
| Frequency Flatness: | ±2.5 dB |
| VSWR: | 2.3:1 Max |
| Video Output Load Impedance: | 95 ± 1 Ohm |
| Video Load (Ohms): | 95 |
| CW Immune Time at CW = -40 dBm: | 4 ms Max |
| Immune Power (CW): | TSS to -40 dBm |
| Propagation Delay: | 80 ns Max from 50% RF to 10% Video |
| DC Offset: | 0 to 100 mV |
| Dynamic Range: | -65 to 0 dBm |
| Noise Figure: | 6.5 dB Max |
| Isolation: | 60 dB Min All Ports |
| Switching Speed: | 100 ns Max |
| 1 dB Compression Point: | +13 dBm Min |
| Saturated Power: | +20 dBm Max |
| Second Harmonics: | -9 dBc Min |
| Third Harmonics: | -12 dBc |
| Video Frequency Flatness: | ±1.75 dB Max @ 25°C |
| Log Accuracy: | ±1.75 dB Max @ 25°C |
| Absolute Log Accuracy: | ±2.0 dB Max |
| Pulse Width Process Range: | 100 ns to 100 µs |
| Video Output Drive Capability: | Driving 100 ft. RG180 into 95 Ohm Load |
| Pulse Density Capability: | No Pulse Amplitude Loss, 20% Duty @ 100 ns PW, 70% Duty @ 100 us PW |
| Noise Level: | 30 mV RMS Max |
| DC Power: | ±15 V ± 5% @ 0.6 A max. for +15 V ±15 V ± 5% @ 0.2 A Max for -15 V |
| Stabilization Bake: | 24 hours @ +85 °C |
| Burn In: | 48 hours @ +85 °C DC Power On |
| Maximum Input Power: | 1 W CW, 100 W Peak @ PW = 1 µs & 1% Duty |
| Ripple from DC to 10 MHz: | 100 mV Max |
| CW Recovery Time at CW = -40 dBm: | 120 µs Max |
| Pulse Droop: | 70 mV Max (@ -65 dBm) |
| Video Output @ -65 dBm: | 320 ± 123 mV for All Frequencies |
| Baseline Shift: | 200 mV Max @ -40 dBm CW |
| Pulse Amplitude Loss with Pulse Power: | -30 dBm@ CW Power = -50 dBm, No Loss @ CW Power = -40 dBm, 2 dB Loss Max |
| Linear RF Gain: | +33 dB Min |
| MTBF: | 5000H @ 50 °C |
| Connectors: | RF & Video: SMA (F) DC Power & Control: 9 Pin Micro D-Sub (F) |
| Size: | 2.25" x 2.69" x 0.40" |
| Finish: | Gray Paint, No Paint on Mounting Surface |
| Export Classification (ECCN): | EAR99 |
| Environmental Ratings: |
| Operating Temperature: | -10 °C to +85 °C |
| Thermal Shock: | -10 °C to +85 °C, 10 Cycles, 1 hour Dwell Time at Each Temp, Rate of Temp Change 15°C/min. |
| Random Vibration: | 20 Hz to 2000 Hz, Random 16.8 grms in all 3 Axis for 15 minutes min. |