ERDLVA-2G8G-65-70MV-2 Preliminary

CW Immune ERDLVA

Quantic PMI Model ERDLVA-2G8G-65-70MV-2 is a CW Immune ERDLVA that operates from 2 to 8 GHz. This model features an internal switch used to switch between the bit in and rf in with input blanking on both parts. The video output is designed to drive a 100 ft. cable. 

Product Specifications

General Parameters:
Type: DLVA
Status: Preliminary
Frequency Range: 2 to 8 GHz
Frequency Min: 2 GHz
Frequency Max: 8 GHz
TSS: -71 dBm
Size: 2.82" x 2.25" x 0.50"
Log Slope: 70 ± 3 mV/dB
Log Range: -65 to 0 dBm
Log Linearity: ±1.0 dB Max
Rise Time: 28 ns Max (10-90% Tested from -50 to 0 dBm)
2 8ns Max (10-90% Full Dynamic Range Guaranteed)
Fall Time: 300 ns Max (10-90% Tested from -50 to 0 dBm)
300 ns Max (10-90% Full Dynamic Range Guaranteed)
Recovery Time: 1 µs Max (From 90% to within 1.5 dB of baseline)
Settling Time: 50 ns Max (From 10% to within 70 mV of final value @ -40 & -10 dBm)
Finish: Gray paint, no paint on mounting surface
Video Freq Flatness: ±1.25 dB Max @ 25 °C
Propagation Delay: 50 ns Max from 50% RF to 10% Video
DC Offset: +/-70 mV
Dynamic Range: -65 to 0 dBm
Isolation: 60 dB Min All Ports
Switching Speed: 100 ns Max
Log Accuracy: ± 1.25 dB Max @ 25 °C
Absolute Log Accuracy: ±2.0 dB Max
Pulse Width Process Range: 100 ns to 100 µs
Video Output Drive Capability: Driving 100 ft RG180 into 95 Ohm Load
Pulse Density Capability: 10% Duty @ 100 ns PW, 70% Duty @ 100 µs PW
Noise Level: 20 mV RMS Max
DC Power: ±15 V ±5% @ 0. 5A Max For +15 V
0.2 A Max for -15 V
Stabilization Bake: 24 Hours @ +85° C
Burn In: 48 Hours @ +85 °C DC POWER ON
Input VSWR: 2.3:1 Max
Maximum Input Power: 1 W CW, 100 W Peak @ PW= 1 µs & 1 % Duty Cycle
Ripple from DC to 10 MHz: 100 mV Max
Pulse Droop: 70 mV Max for PW 100 µs @ -65 dBm
MTBF: 5000H @ 50 °C
Video Output Load Impedance: 95± 1 Ohm
Video Output @ -65 dBm: 330 ± 88 mV for all frequencies
Baseline Shift: 200 mV Max @-40 dBm CW
Pulse Amplitude Loss with Pulse Power: -30 dBm @ CW Power = -50 dBm,
No Loss @ CW Power = -40 dBm,
2 dB Loss Max
Connectors: RF & VIDEO: SMA Female
DC POWER & CONTROL: 9 PIN D-SUB Female
Environmental Ratings:
Operating Temperature: -10 °C to +85 °C
Thermal Shock: -10 °C to +85 °C, 10 cycles 1 Hour Dwell time at each temp, rate of temp change 15 °C/Min
Random Vibration: 20 Hz to 200 0Hz, Random 16.8 Grams in all 3 Axis for 15 Minutes Min