ERDLVA-8G18G-65-70MV Active

CW Immune EW Detector Module (ERDLVA)

Quantic PMI Model No. ERDLVA-8G18G-65-70MV is an 8.0 to 18.0 GHz, CW immune ERDLVA that features an internal switch used to switch between the BIT IN and RF IN with input blanking on both ports. The video output is designed to drive a 150 ft cable.

Product Specifications

General Parameters:
Type: DLVA
Frequency Range: 8.0 to 18.0 GHz
Frequency Min: 8 GHz
Frequency Max: 18 GHz
TSS: -71 dBm
TSS (Measured): -71 dBm
Size: 2.82” x 2.25” x 0.5”
Log Slope: 70 ± 3 mV/dB
Log Range: -65 to 0 dBm
Log Linearity: ±1.0 dB Max
Rise Time: 28 ns Max (10-90 % @ -40 & -10 dBm)
Fall Time: 300 ns Max (@-40 & -10 dBm)
Recovery Time: 500 ns Max (From 90% to within 1 dB of baseline)
Settling Time: 50 ns Max (From 10% to within 35 mV of final value @ -40 & -10 dBm)
Power Supply: +15 V ±5% @ 0.5 A Max,
-15 V ±5% @ 0.2 A Max
Dynamic Range Log: -65 to 0 dBm
Finish: Gray Paint
VSWR: 2.3:1 Max
RF Connectors: RF & Video: SMA (F)
DC Power & Control: 9 Pin D-Sub (F)
Video Load Impedance: 95 ±1 Ohms
Maximum Input Power(CW): 1 W CW, 100 W Peak @ PW = 1 µs & 1% Duty
Propagation Delay: 80 ns Max from 50% RF to 10 % Video
DC Offset: 0 to 100 mV
Dynamic Range: -65 to 0 dBm
Isolation: 60 dB Min, All Ports
Switching Speed: 100 ns Max
Video Frequency Flatness: ±1.75 dB Max @ 25ºC
Log Accuracy: ±1.75 dB Max
Baseline Shift with CW: 200 mV Max @ -40 dBm CW
Absolute Log Accuracy: ±2.0 dB Max
Pulse Width Process Range: 100 ns to 100 µs
Video Output @ -68 dBm: 320±123 mV for all frequencies
Video Output Drive Capability: Driving 100 ft RG180 into 95 Ohms load
Pulse Density Capability: 20% Duty @ 100 ns PW, 70% Duty @ 100 µs PW
Noise Level: 30 mV RMS Max
CW Immune Time: 4 ms Max
Operating Temperature: -10 ºC to 85 ºC
Thermal Shock: -10 ºC to +85 ºC, 10 Cycles 1 hour dwell time at each temp, rate of temp change 15ºC/MIN
Ripple: 100 mV Max