General Parameters: |
Status: | Active |
Frequency Min: | 0.0298 GHz |
Frequency Max: | 0.0302 GHz |
Insertion Loss: | 9 dB Max |
Attenuation Range: | 0 to 63.5 dB in 0.5 dB Steps |
Digital Control: | 7 Bit |
VSWR: | 1.4:1 Max |
Attenuation Accuracy: | 0-4 dB: ±0.2 dB 5-9 dB: ±0.3 dB 10-16 dB: ±0.5 dB 17-24 dB: ±0.6 dB 25-30 dB: ±0.7 dB 31-40 dB: ±0.7 dB 41-50 dB: ±0.7 dB 51-63.5 dB: ±2% of attenuation Value |
Power Supply: | +5.0 to 5.2 VDC @ 750 mA Max |
Finish: | Chemically Coated |
Sealing: | Hermetically Sealed |
Switching Speed: | 650 ns Delay Max, 500 ns Rise Time Max |
Input Power: | +10 dBm Max |
Switching Rate: | 10 kHz Max |
Attenuation vs. Frequency: | 0.1 dB Peak to Peak |
Input/Output Impedance: | 50 OHMS |
Linearity (Over any 6 dB Range): | 0.5 dB Peak to Peak up to 50 dB Attenuation |
Insertion Phase: | 30° ± 5° |
Phase vs. Frequency: | 2.8° Peak to Peak |
Phase vs. Attenuation: | 0 to 44.0 dB: 3.0° Peak to Peak 44.0 to 50.0 dB: 7.5° Peak to Peak |
Control Input Impedance: | 8 Equivalent TTL loads Max including 1k Pull-Up Resistors |
Control Input Logic: | TTL Driver with Rise/Fall of 200ns |
Binary Code: | 7 Bits, 00000000 = Insertion Loss |
Attenuation per bit: | A0 = LSB = 0.5 dB, A6 = MSB = 32 dB |
Transients: | 5 mV Peak to Peak for 0.5 dB Steps 10 mV Peak to Peak for 63.5 dB Step |
Terminals: | MIL-T-55155/23 or Equivalent |
Environmental Ratings: |
Operating Temperature: | 0 °C to +70 °C |
Non-Operating Temperature: | -40 °C to +70 °C |
Shock: | MIL-STD-202F, Method 213 Cond A, except 18 G's in each axis |
Vibration: | MIL-STD-202F, Method 201, except frequency of 5 to 55 Hz, Double Amplitude of 0.06 inches |
Fungus: | MIL-STD-454, Materials shall not support fungus growth |
Leakage: | MIL-STD-883, Method 1014.9 |